Tourqe settings?

[1992vr4]

Hey I was just wondering if anyone had the tourqe settings off the top of their head for the valve covers and the intake.

[1992vr4]

My bad,for a 92 tt 3kgt.

[xwire]

valve covers 9-11 lbs
intake
lower: 9-11 lbs
upper: 11-15 lbs

[5spdES]

Are they the same for the 93 es dohc stealth? For the intake manifold to change the spark plugs and is there any certain pattern they need to be tightend in.

[xwire]

yes, and as with most aluminum items start at the center and work your way out in a circular pattern

[5spdES]

OK so if I go rite on the top go left on the bottom

[xwire]

on the upper I do the front center one , rear two center, front two outer then the two nuts, then tighten the ones on the back side from the brackets to the manifold

[1992vr4]

Thanks alot.

[5spdES]

OK cool thanks a lot thyself much needed info

[1992vr4]

For some reason my front right valve cover screw just came loose and I just replaced both valve cover gaskets like 6 months ago...? I figured better check the rear cover as well,it would be nice if it wasn't such a pain in the ass to get at that rear cover.