The Official "Post pics of your Engine Bay" Thread

[Racer 007]

Just as the title says, post some pics of your bays.

Here is mine

[Racer 007]

Entirely Hand Painted by yours truly

[Racer 007]

A little dirty still.

[Racer 007]

But give me some more time and it will look much better. I used 1200 degree auto paint that I got from a local muscle car shop. I couldn't find anything at the pep boys or auto zones around here. Most of theirs was 550 degree paint and nothing in the colors that I wanted.

Working on the wires and hoses next.

[DJ Eric P.]

http://images.cardomain.com/installs/190000-190999/190607_15_full.jpg

[DJ Eric P.]

http://images.cardomain.com/installs/190000-190999/190607_16_full.jpg

[DJ Eric P.]

http://images.cardomain.com/installs/190000-190999/190607_17_full.jpg

[3SGTE-WaNNaBe]

Richard. How's that paint holding up so far? How long have you had it on? And does it come in something w/a higher gloss? I've been considering polishing but I'm just too lazy hehehe. Thanks.

Oh, and hello 3s peeps.

[Racer 007]

Its been holding up very well. I only had a small problem when my injector was leaking and sprayed fuel on the plenum. I just touched it up. Other than that, no peeling or flaking anywhere.

They do sell a 1200 degree glossy clear coat so I plan on putting that on pretty soon to shine it up.

[Sean 91 VR4]

Just keep'en the threads up to date...

[ADLER]

nothing too special
http://filebox.vt.edu/users/mwinters/3000GT/97%20and%2099/97%20Engine.JPG

[ADLER]

here is a pic of Bacho's engine ('99)
http://filebox.vt.edu/users/mwinters/3000GT/97%20and%2099/99%20Engine.JPG

[last_in_line]

shawn 91 where did you get that yellow tubing for the ic
i went to dodge and the auto parts stores and nobody has the ic tubing

[Racer 007]

it's yellow duct tape.

[dahur1]

Here's mine.

Dan
'94 red R/T
VLS

[Profit]

http://mysite.verizon.net/~vze258v5/valcover1.JPG

[Tool Man]

http://www.members.cox.net/dempsey7/3SI/dohcbling.jpg

[twntrbovr4]

http://img124.exs.cx/img124/2447/myenginestock.jpg

this is when it was completely bare "stock". it hasn't changed all to much but I think it looks pretty good for a 12 year old car.

i'll put up a recent pic tomorrow.

[xwire]

old and new, of course the newest is even better

[Mikahl]

http://memimage.cardomain.net/member_images/12/web/552000-552999/552522_50_full.jpg

The rest can be seen at: http://www.cardomain.com/memberpage/552522/8
(This is post my polishing project)

[Mikahl]

Hey Xwire, you just removed your plates that cover the pulleys/belts?? And it works fine?

[xwire]

actually, that was the NG 03 and I had not found the other one yet:rolleyes: since then they have been painted siver and reinstalled, and since those pics were take, have access hole that are the same size as the cam gears to allow adjustment with out having remove the covers

[Tool Man]

Mikahl I didn't realize who you were until I saw the car domain site. :p

[mywetdream]

http://memimage.cardomain.net/member_images/1/web/373000-373999/373704_70_full.jpg

[Mikahl]

oh wow, so..they don't sell those anywhere? Or did you fabricate that yourself?
Toolman: Ya I'm with the outragous bumpers, soon to be oem replaced btw!!

[mjannusch]

http://mjannusch.home.comcast.net/engine.jpg

[twntrbovr4]

http://img124.exs.cx/img124/2447/myenginestock.jpg

this is when it was completely bare "stock". it hasn't changed all to much but I think it looks pretty good for a 12 year old car.

i'll put up a recent pic tomorrow.

here it is as of pretty much now:

http://img111.exs.cx/img111/8711/my3kgtvr4072small.jpg

[tonyvr4]

Here is a pic of my 1997 VR-4. What do you think ?

Tony

[Tool Man]

Here is a pic of my 1997 VR-4. What do you think ?

Tony

Nice, very clean.

[tonyvr4]

I certainly try and keep it that way. It is a lot of work but the end result is awesome.

I wish I had a better job where I could afford to do more
Tony

[twntrbovr4]

i think everyone on the forum should post on this thread so that every 3s owner out there can get an idea as to what you can do with our engines.

just my oppinion - Seth

[Tool Man]

I made a plenum Harness cover at work, here is an updated pic.


http://www.members.cox.net/dempsey7/Newenginepic.jpg

[niterydr]

I rock.

http://memimage.cardomain.net/member_images/8/web/356000-356999/356415_16_full.jpg

[dahur1]

Tool Man,
Where did you get the polished radiator pipe from, and was it very expensive?


Dan

[Terry V]

http://www.maximalperformance.com/terry/RadPipe1.jpg