carbon fiber dash kit

[DJ Eric P.]

I have a incomplete carbon fiber dash kit for sale. these are the pieces left over from two separate sets. The first one I ordered didn't have my digital A/C control piece or the door control piece, so I had to buy a second set. I bought both sets of of ebay the first one for $109 and the second one for $129. They both look identical. I do have doubles of a couple of pieces, so I will piece those out, but the rest of it will be sold as one. The big set is $55 + shipping (approx $5) and you can make offers on the other pieces.

Only reply if your intersted in the item or have questions. If your replying to say they're rice or they look like shit don't bother to reply.

BTW - I do take paypal ericpayne@attbi.com

Thanks, Eric

big set:
http://images.cardomain.com/installs/190000-190999/190607_36_full.jpg
doubles:
http://images.cardomain.com/installs/190000-190999/190607_37_full.jpg

[Racer 007]

Dude, how rice is that?:D

[DanK]

If it will fit a '94, which it looks like it will, consider it sold. How much do you think shipping will be? Email me @ DanK1079@hotmail.com
I can't pay you by paypal but I'll send out a money order. Let me know.

[DJ Eric P.]

The pieces on the big kit include:
1. speedometer bezel
2. center air vent
3. driver side air vent
4. pass side air vent
5. automatic shift insert
6. automatic A/C control
7. driver side door handle
8. pass side door handle
9. left side of steering wheel control
10. right side of steering wheel control
11. radio trim
12. traction control
13. accelerator switch accent
14. accelerator surround.

the pieces I have doubles of are:
1. speedometor bezel
2. automatic shifter insert
3. maual A/C control

the pieces missing from the set are:
1. driver/pass door vents
2. driver/pass side door controls
3. ashtray and ashtray surround
4. shifter
5. automatic A/C cotrol pieces (4 pcs.)

here's a pic of the $130 set on ebay:
http://www.antiquecast.com/Images/AiRRt6mS98I/Diagrams/MSB-3000GT-91UP

[DJ Eric P.]

Originally posted by DanK
If it will fit a '94, which it looks like it will, consider it sold. How much do you think shipping will be? Email me @ DanK1079@hotmail.com
I can't pay you by paypal but I'll send out a money order. Let me know. Well like the kit above it says 91' & up, so it should fit.

BTW - I foregot to mention, on the pass side door handle piece. I dosen't have the sticky back cover on it. I peeled it off and threw it away by accident, but it still does stick. If it doesn't stick good enough you can always use some 3M glue on it. That is the only piece that has been used (I tried to install it one time), everything else is pretty much brand new.

[DJ Eric P.]

Originally posted by Richard
Dude, how rice is that?:D Man if I was a moderator, I'd delete your post and ban your asssss.:D

[chineese accent] ahhh special purice fo yoo Richy, onwee $59.95 cheep cheep [/chineese accent]

[DJ Eric P.]

Originally posted by DanK
If it will fit a '94, which it looks like it will, consider it sold. How much do you think shipping will be? Email me @ DanK1079@hotmail.com
I can't pay you by paypal but I'll send out a money order. Let me know. Shoot me a PM for the details

[DJ Eric P.]

DanK - you have a PM

[DJ Eric P.]

Dan, let me know when you get it.

[DanK]

Still Waiting...anxiously. I'm gonna go and track it. I'll let you know though.

[DanK]

The carbon fiber has arrived!! Everything looks great Eric, and I am going to install it tomorrow. Thank you so much. I'll let ya know how the install goes.:dancer:

[DJ Eric P.]

Cool, glad you got it and hopefully everything installs perfect.

[DanK]

I'll know in an hour or so. I also contacted aaa exoticwood and they are going to figure out a price and send me the missing pieces.:D

[DanK]

Eric,
Ont the picture at the top of this thread, what is the piece above and left of the speedo piece??? I can't find anything like it in my car, it's the one that has a thick surround with a hole the size of one of the switches to the right of the steering wheel.

:confused:

[DJ Eric P.]

I don't know what it is. I think it is from the $109 kit I got off of ebay. Do a search on ebay motors for 3000GT and look at the kits. They should have a page just like the one I posted. I would do it, but I'm at work and don't really have time. If you find out let me know.

It could be for a base model or something.

[Racer 007]

How do these look installed BTW. Can you tell it's a stick on or does it blend pretty well?

[DJ Eric P.]

The ones on the dash, center console and steering wheel controls look good. The ones one the door, ash tray, door vents don't seem to fit ass good due to the curves.

[Racer 007]

Yeah, I thought about the ashtray one. I wonder how it would be if they were just painted. Just finding the right color paint would probably be the issue.

[DJ Eric P.]

Paint is not bad, but time consuming. Like I said the dash ones don't look like stick ons, but the door ones you can tell.

[Mitsu3000GTSL91]

I bet its the piece around your hazard lights. Thats the only thing that is in that shape.

[G2Nice]

dude, have you sold all the carbon fiber yet? I have a carbon fiber setup too, but I don't have half the pieces you have. Let me know, very interested.

[DJ Eric P.]

Sorry it's been sold for a while.